top of page
Freezing

How to drain your pool equipment in case of freezing temperatures:

The best thing for your pool is to keep the water flowing.  

If the power goes out for more than 30 minutes to 1 hour then you will need to shut the breakers off and take out the drain plugs on your heater, pumps, and filter as well as open up the air relief on the top of the filter.  

After you've done that, put as many blankets as you can over the top of the equipment to form an insolated dome over the top.

Aerial View of a Swimming Pool

Here are pictures of where the drain plugs are located:

Be aware air reliefs and plugs may be frozen. Pouring hot water on drain plugs may assist this process. If you can't unscrew them the best you can do is try to remove most and cover all the equipment with blankets.

NEVER cover an open heat source with blankets. 


*Always use caution. Read all instructions before using outside heating sources near the equipment.

Actuators

Here are pictures for reference:

That's it! Following these steps will help you move a pool spa actuator using the 3-way switch on them. Remember to always be careful when working with pool and spa equipment, and to follow all safety guidelines and instructions.

If the actuators do not move when the switch is changed you may have a bad actuator and would need a repair tech to further diagnose. Contact us for help.

Guide for Changing Actuators Positions

Determine which direction the actuator needs to be moved. This will depend on whether you want to direct water flow to the pool or the spa. The pool side usually has multiple pipes where as the spa side will have 1 pipe in most cases. We have pictures for reference.

1. Locate the 3-way switch on the pool spa actuator. This switch will have three positions: "1", "2", and "Off".

2. Determine which direction the actuator needs to be moved. This will depend on whether you want to direct water flow to the pool or the spa.

3. Move the 3-way switch to the desired position, either "1" or "2", depending on where you want the water flow directed.

4. Observe the water flow to make sure that it is directed to the correct location. You should see water flowing into the pool or spa, depending on the position of the 3-way switch.

5. If the water flow is not directed to the correct location, move the 3-way switch to the opposite position and observe the water flow again.

6. Once you're satisfied with the water flow, leave the 3-way switch in the "1" or "2" position, depending on where you want the water flow directed.

Private Pool
Equipment List

Equipment List

tristar-vs-950.jpg

TriStar® VS 950 variable-speed pump is the newest addition to the family of the most energy-efficient variable-speed in-ground residential pumps on the market, according to EPA ENERGY STAR third-party testing data. This pool pump has been upgraded with a chemical-resistant Viton® seal and a 4-year warranty. And like all TriStar VS pumps, TriStar VS 950 can save up to 90% on energy costs, an average of $1500 per year, compared with traditional single-speed units.

Designed to replace most high performance pumps up to 3 HP

Upgraded with an extended-life Viton pump seal that provides improved resistance against chemical imbalances vs. standard pump seals

A standard 4-year warranty

No-rib, extra- large basket design ensures easy leaf and debris removal and extends time between cleanings

aquarite-900-and--turbocell925.jpg

The AquaRite 900 Series now offers unmatched comfort, convenience, and peace of mind.

 

As the global leader in salt chlorination, Hayward provides luxuriously soft water and the most convenient sanitization method on the market to millions of pool owners around the world. Whether converting an existing traditional chlorinated pool or simply adding smart pool control to an existing salt chlorinated pool for the ultimate pool experience, the AquaRite 900 series delivers the very best in soft, silky, and perfectly sanitized water without ever having to lift a finger—with a guaranteed peace of mind.

 

The Extended Life TurboCell produces 25% more chlorine over its lifetime than our leading AquaRite systems, cutting your annual chlorine costs by 50%. Plus, an industry’s best 4-year warranty means customers can relax in the comfort of their pool completely worry-free.

universal-colorlogic.jpg

Universal ColorLogic® color LED lighting will transform your customers' outdoor environments. They're the only, UL-listed lights to retrofit virtually any existing pool and spa with vibrant color - even those with just one light.

 

100% brighter than any on the market, these energy-efficient, lights deliver spectacular color to pools with a single incandescent light or pools with colored finishes, and breakthrough cost savings and installation versatility for new pools, spas and fountains. All-plastic, low-voltage design, combined with all-plastic Thin Niche eliminates the need for bonding, grounding and GFCI. Thin Niche also reduces cost for dig, steel and gunite because it is only 2.75in front-to-back and mounts to the face of the rebar grid. Pool and spa lights are UL listed for wall or floor installs without a rock guard and can be positioned just 4in from lens to water level - perfect for steps, beach entries and fountains.

hdf400-0.jpg
  • Compact design: The industry’s smallest footprint heater and lightweight design makes installation easy in any environment

  • Easy-out mixing orifice: Allows for easy in-field conversion between natural gas and propane

  • Cupro nickel heat exchanger: Protects against water corrosion and natural wear

  • Patented Butterfly bypass: Enables flow rates up to 125 GPM without extra accessories

  • Exclusive plumbing adapters: Allow for simple drop-in replacement with no pipe cutting required

  • Zero wall clearance: Fits seamlessly into smaller pads and tight spaces

  • Quick-access reversible top: easily swaps plumbing from right to left while providing access to gas shutoff, voltage selection and more, all via a single fastener

  • Low NOx emissions: Meet clean air quality standards while providing premium heating performance.

OmniLogic.jpg

Eliminate complexity. With the most intuitive, icon-based user interface on the market right on the base unit, set your controller to fit YOUR needs and preferences quickly and easily. Setting up familiar names for pool and spa features, as well as other automated activities eliminates guessing games.

 

Customize to fit your lifestyle. Adjustable Favorites buttons allow you to set the features you use the most at your fingertips. And with dramatically expanded backyard themes, each family member has the ability to personalize themes for custom ambiance.

 

Minimize Maintenance. Designed to be salt-ready, and compatible with Sense & Dispense, let OmniLogic keep your chemicals perfectly balanced. Easily set schedules and maximize energy efficiency for cleaning and filtration processes.

 

Easily Expand. Thinking about adding a water feature? Possibly more landscape lighting? OmniLogic can accommodate you. With simple expansion hardware, it's easy and cost effective to seamlessly add features from heaters to pumps to lighting.

 

Stay Cutting Edge. OmniLogic is designed and engineered to advance with automation technology. The system's unique architecture allows for effortless access to the latest software upgrades, new capabilities, or even restoration of previous configurations.

 

Conveniently control your world. Seamlessly access your backyard via apps for iPhone, iPad, and android devices, wireless and wired remotes, or the base unit itself depending on where you are or what you're doing. OmniLogic also has the ability to integrate with select home automation systems.

 

Choose the best in backyard control with OmniLogic.

TriStar_VS_950_Omni.jpg
OmniHub_Comp.jpg

Hayward OmniHub™ smart pool and spa control offers the easiest way to add total control to pools and spas – anytime! Compatible with Hayward pool products and most pool equipment brands, users have the ability to access, schedule, and manage the entire pool pad, all through their smartphone or voice controlled devices. OmniHub installs quick and easily to control virtually every piece of pool and spa equipment including: Variable-speed or single speed pumps, heaters, pool/spa lighting, spa settings, Hayward AquaRite salt chlorination systems, booster pumps, cleaners, backyard lighting, and water features.

  • Easiest and most affordable way to add smart pool control to nearly any pool.

  • Seamless Integration: Compatible with Hayward pool products and most pool equipment brands for entire pool and spa pad control.

  • Convenient Control: Access, manage, and schedule from anywhere via iOS and Android smartphones and voice controlled devices, including Amazon Alexa.

  • Smart Home Expansion: Works with popular home automation systems including Amazon®, Nest®, Control4®, and Crestron®.

  • OmniHub includes: wiring base unit, control pad, and 1 Smart Relay for control of equipment including variable-speed pumps, heaters, pool/spa lighting, spa equipment, and salt chlorinators.

  • Flexible & scalable: Ability to add up to 2 additional Smart Relays for even more control including booster pumps, cleaner, backyard lighting, and water features.

  • Luxurious pool water in the palm of the hand: OmniHub is a simple upgrade to Hayward’s AquaRite salt chlorination systems, for both new and existing system installations.

ProGrid.jpg

ProGrid vertical grid D.E. filters provide superior water clarity, efficient flow and large cleaning capacity for pools and spas of all types and sizes. ProGrid combines high-tech features and a ”service-ease” design for unparalleled filtration.

 

  • Filter tanks are made from the most durable materials to meet the demands of the toughest applications and environmental conditions

  • High capacity, rapid release manual air relief valve bleeds air with a quick quarter turn of the lever

  • Heavy-duty, tamper-proof, one piece flange clamp securely fastens tank top and bottom and allows quick access to all internal components

SwimClear-02.jpg

ProGrid vertical grid D.E. filters provide superior water clarity, efficient flow and large cleaning capacity for pools and spas of all types and sizes. ProGrid combines high-tech features and a ”service-ease” design for unparalleled filtration.

 

  • Filter tanks are made from the most durable materials to meet the demands of the toughest applications and environmental conditions

  • High capacity, rapid release manual air relief valve bleeds air with a quick quarter turn of the lever

  • Heavy-duty, tamper-proof, one piece flange clamp securely fastens tank top and bottom and allows quick access to all internal components

Your Pool Should Be An Escape... Not a Burden!

bottom of page